TPK018 By F1RZN (c) 1996
my TPK won't talk to my tnc...
To : TPK@eu
fc1rzn/TPK 1.81 msg #:102 date:10-04-93 time:18:30z
hi to all TPK users,
It seems that quite a few stations have problems when starting TPK:
The tnc won't respond and TPK won't talk to the tnc...And doing (alt-v)
will not do much either...
Well ! Check that your rs232 is set to 8 bits,no parity and 1 stop bit...
for the speed and the com port,it is set in TPKinst so it should be ok
...But it can't hurt to check twice !
Let me know if that cured your problems...
look at TPK702-2 (db9/db25 wiring),a bad wiring can also be the cause
for this problem.
Fc1rzn chris...And enjoy TPK !
Back to main menu.